Reflective Road Stud
Specification
1. Size
-
Quadratic
body of 100mm x 100mm with a shank of 60mm length x 18mm diameter
2. Reflective
Panel
-
43 glass reflectors embedded in plastic.
Reflectivity complies to BS 873 : Part 4 : 1987. Standard colors available are
white, amber and red.
3. Weight
-
Body complete with shank and two reflective
panels approximately 420 grams.
4. Body
Material
-
Die-cast aliminium alloys.
-
Withstand loads exceeding 275 kN
5. Installation
Procedure
-
Installed in concrete or asphaltic surfaces;
easily by drilling a hole to the required diameter and depth and bedded in a
suitable bituminous grout or an epoxy mortar binder.
